Because straight up multiple saws bring them high returns: produce high-quality products; Reduction of a processing process; The rate of timber production has been increased.
There are three main factors that affect the direct spelling effect: plate factor, equipment factor and saw blade factor. Firstly, the surface of the dried sheet should be flat, and there is no defects such as warping caused by dry internal stress. The moisture content of the plate is uniform and satisfies 8-12 %; Plate nearly many pieces of saw need to be pre-planed light treatment; The leakage planer can not be too large; Plate length can not be too short and so on.
Secondly, the equipment aspect requires the sheet saw cut surface to produce smooth and average continuous saw marks; After the division, the narrow strip achieves high accuracy, such as + / -0.1 mm; The straightness and line degree of the cut strip; The sawing surface guarantees strict straight angles and so on.
Finally, the sawblade aspect requires the customer to use the sawblade that is specially made straight. The direct splicing saw blade will not cause the cutting surface temperature of the saw to be too high, which will affect the adhesive to penetrate into the wood surface; The strength of the saw plate itself is very high; Sawtooth must be regularly polished and so on.
It is worth mentioning that our after-sales service team has also gained a lot of experience from many successful cases with the promotion of power direct spelling technology in China. For example, for different customers of different types of wood, different thickness of the plate to achieve the quality of straight jigsaw cut, what kind of processing speed should be recommended, how thick saw blade; From boot production to the end of production, how to maintain the equipment to ensure the stability of the straight spell and so on.
